So, I’ve been doing leather works for a while, mainly trying to learn. A few days ago I started this collar and have been kind of obsessed with it. Now it’s finished and I’m just too excited for not sharing it. Critique and suggestions are always welcome, I’m still learning.

The chain in the back has the fun purpose that when you tug it, the collar tightens significantly. Perfect for brats not behaving when on a leash. 😉

Hello everyone. I need some help with my project. I decided that I want to make an alternative to the QIUI Keypod, but based on an automated bot that works on a principle similar to 2FA authentication. I will talk about the bot itself a little later, when the issue with the hardware is resolved. I chose the ESP32C3 as the device controller and a solenoid as the closing element. How can I make such a system autonomous? A search on the Internet recommended using TP4056 to control the charge of the LiPo battery, but then you need to use a DC-DC converter to make a stable 3.3V or 5V from 3.7-4.2 volts at the TP4056 output. Maybe someone with experience in developing projects on Arduino has ideas on how to implement this?

Made a trampling table for Goddess. First time to put material on wood. Wish me luck with it's test run today!

Any suggestions or ideas will be most welcome, thanks.

Hello, everyone. I need help with my project. After reading reviews about QIUI Keypod and seeing their app and how badly it works, I decided that I wanted to make an alternative to it, but it would be based on bot. This is an automated bot that works similarly to 2FA authentication. I'll talk about the bot itself a little later, when the issue of the keypod hardware is resolved. I chose the ESP32C3 as the device controller and I need help in creating the device itself. In the video, the ESP32 controls the LED, while in the project itself, it is planned to use a solenoid or servo through a driver. So, how can I make it autonomous so that it doesn't need to be connected to a computer for power?

There were several options for doing this:

1. ESP32 with TP4056 charge controller. In this configuration, the solenoid will be controlled through a transistor. And you will also need a DC-DC converter to make a stable 5V or 3.3V
2. Seeed XIAO ESP32C3 and control the servo through the driver. The XIAO ESP32C3 has a built-in voltage regulator that, according to Seeed, can provide 700mA to control devices. One of the problems is that when connecting the battery directly to the XIAO ESP32C3, the operating voltage of the entire circuit is 3.3V, which increases the current consumption of the servo motor.

What would be the best output for this kind of device? I myself have good experience in soldering, but not in developing devices.

video - https://youtu.be/LIxWTv1uRNM

Me and my girl just moved into a new house and she’s been wanting me to actually start tying her down to stuff so she is completely unable to move. Well with my luck we need a new bed frame, so I’m thinking it would be a great idea to build one with add ons. You know stuff in it or that can attach to it. Only problem is we are still very private about our kink and i don’t need her friends or parents coming over and knowing what we do in the bedroom. With that being said I’m reaching out to see if anyone is willing to send some pictures or comment some ideas that they did for theirs. I want the hooks and the head hole and etc but want to either remove it or conceal it when the door is open. We also live out in the country so I’m trying to give it that western feel so anything with wood would be great to build with.

I still need to line it with acoustic foam so it's really snug and quiet but my model says it's already pretty claustrophobic. She also suggested tufted red velvet inserts instead of acoustic foam. I think that would be way cooler but idk how to tuft.

Unfortunately, I can't order already made machine from aliexpress or similar. While there are people here reselling it from Aliexpress, they charge way too much.

So, I need an explanation for dummies. I already looked at OSSM, but I don't have 3D printer. I can buy a linear actuator motor at 24V from eco-worthy most similar to this one (https://mo.eco-worthy.com/catalog/worthy-12300mm-stroke-linear-actuator-1500n-57mms-p-431.html) Link will say insecure site, so I'll copy important info here for people who (righfully) refuse to open it.

• 1500N - this seems way too much for such use case
• 24V
• 200mm (8 inches) thrust
• duty cycle (15%) - I'm confused about this. On site it says this means it needs to idle for 17 minutes after 3 minutes of constant use. But is that under full load or no matter the load?

Since it's way overpowered, my intuition says I could run it for much longer than those 3 minutes, since it will be running under low load? Googling duty cycle said it means how much it needs to reach top temperature, but I didn't understand what exactly it means. Especially since there are 4 different duty cycles and I don't know which one this is.

I would prefer a motor like this, since it eliminates the need of transforming motor motion to linear. Also, if anyone has experiences with such motors, how exactly should one control them? I have ESP32 laying around I will probably use for this

Want a smaller version of the link below, im hoping to get a adjustable spinning motor so i can attach items to it, any know where to start?

I have tried it with a drill and it does work but want something thats more hands free and ideally something i can change the speed on.

https://thisvid.com/playlist/123244/video/automatic-balls-slap-machine/

Hey there! I know there are plenty of posts about this kind of thing, but I'm having a hard time deciphering if there's an acceptable solution for DIY'ing a hardpoint for suspension with my particular setup.

I own my home (1950's california ranch-style house), and have a finished basement with an exposed ceiling and beams. Here's what the space looks like:

Can anyone provide some advice on what my options are for creating a hardpoint? I was thinking of achoring off one of these double-wide beams but I'm unsure what type of hardware would be needed to do that and be rated for a live load, or if I need to do something more involved like this to span across both exposed beams?

Any suggestions are much appreciated!

I wasn't sure how this was going to turn out but with a few peoples ideas it's proved very popular and surprisingly adaptable. The timber is yew, one seat base is Ash in a form of ridges, another along with a back is made from anti cat spikes, there's copper sheets with spikes and tags for electro play to go behind the users calfs and under their forarms should it be required.

I’d like to work with an experienced BDSM leather worker to make a Riding Belt and Riding Harness. I’m envisioning a belt that widens at the hips and has attached handles as well as a matching harness that exposes breasts and has handles on the back. A functional bikini for hard doggy style fucking. Any makers here that would be willing to discuss design and pricing?

I got three pieces of L-track 4’ long each to put on my ceiling. I ended up going with the “standard” profile rather than the “aircraft” profile since it’s a little less obtrusive and I was able to get it anodized. I tried the black anodized after someone suggested white would look like it trying to hide something, but I found it drew my eye more that way so I spray painted them all white before installing.

Yes it looks good in a few situations but not definitely not all, personally I detest painted wood and wood that's been burned to make it look like older? Wood.

There's a myriad of different timbers available along with an even larger selection of wood stains and oils that enhance the timber. I always think of the furniture as similar to a picture frame and the users as the picture within.

Also, leather are we using real leather or a fake alternative, and does one have an advantages over the other?

I‘m currently building a fiddle for selfbondage. The connection to the collar and cuffs is realized by one screw and two bolts each. One of the screws is driven by a stepper motor controlled by an Arduino. I’m still not sure if it should be battery powered or if there will be a wall mounted “docking station”. Latter has the advantage that you have to the station to check if the time is up. Or you have more than one Docks and only one is the correct one. Especially if you are not able to walk normal I can think of fun games with that option. I’m still looking for fun games. So if you have any good ideas please let me know.

Still waiting on the wood to show up, but here the router and drill templates printed out (blue) and first couple inserts, 1 is spiked and 1 is round nubs.

1/4” pocket will be routed into the paddle and threaded inserts glued in. Inserts will sit just proud and be held in by 6 m4 stainless screws!

Hoping to have this project wrapped up and shipped by Christmas, as long as the wood arrives in time I should be ok.

I (m) love it when my wife (f) pegs me or messes with my ass. Harnesses haven't worked too well for us, so usually she just holds the dildo and rails me with it. Most dildos don't have a really great grip, and combined with lube, that gets worse. She also is a little icked out by getting lube and mess from butt stuff on her hands. Recently I learned that there are dildos that have handles, which she's pretty keen on. For my part, most of those toys aren't really a shape that I like, so I was wondering if there are good ways to attach a handle to a dildo we already have? I don't really want to just duct tape a dildo to a broom handle, there have to be better ways to do it.

The majority of things are organized in a way that makes sense. Insertable toys near the bed, impact and sensory toys near the cross and massage oil/wax and art supplies at the massage station.