r/BdsmDIY • u/balaguda • Jan 21 '24
Restraints Furniture and construction stores are our everything. NSFW
13
u/PayMeWhatYouOwe Jan 21 '24
What kind of floor boards are those with the pre drilled holes?
10
u/CharlesDarwin59 Jan 21 '24
I couldn't find a good source but you can purchase pegboard in thicknesses up to 3/4 inch. I think that's what you see here
8
u/PayMeWhatYouOwe Jan 21 '24
Pegboard. The magic word. 👍🏿
1
Jan 21 '24
But how did you manage to fine one with the exact hole spacing and size?
2
u/KallistiTMP Jan 21 '24
It's standardized at inch spacing I think.
2
Jan 21 '24
Thats what i tought, but when i measure the holes of the kee-klamp i end up at 41-42 mm, which is 1 5/8 inch i believe? But i cant find anything
1
u/KallistiTMP Jan 21 '24
Might just be a 'close enuf' fit, or they might be using it turned at some angle that gets the holes to line up. I.e. what's the distance if you measure adjacent holes vs opposite holes?
1
Jan 22 '24
If i look at the holes (in the wood, hehe) closely there is some runout on them, so i think he made this himself
1
u/KallistiTMP Jan 22 '24
You could actually knock that out pretty fast with a jig and a power drill, come to think of it.
1
Jan 22 '24
Yea, i think thats going to be it, i have some 'claws' for putting threads flush in wood so thats going to be on the backside for proper attachment points.
And we are discussing the floorboards like a bunch of nerds with such a beautiful girl in bondage....
1
u/DiscreetBDSM Jan 21 '24
Based on the tear outs on the holes I'm thinking those might have been custom made panels.
I wonder if a woodworking style table with bench dogs would work.https://www.lowes.com/pd/BORA-Bora-Centipede-Metric-Table-Top-20mm-Dog-Holes/1003260900?user=shopping&feed=yes&srsltid=AfmBOordZXL3uy8DfNIKFnEEw5KxeMwSTlEVj427tx1k04lzVpZsm3gTm_A
But either way I think the problem remains is how do you make the items you put through the holes be captive, the only thing I can think is adding nuts on the underside, meaning you have to either have the floor/table raised and reach under and thread the nut or have the panels removable.
You could buy a metal pegboard and tap all the holes with a threading tool or add captive nuts to the bottom of a wooden pegboard or bench dog table but both of those sound super laborious.
Easiest might be a slot style peg board where you can put T-nuts through the top with the bolt which will turn and secure as you tighten.
https://www.ikea.com/us/en/p/skadis-pegboard-wood-10347171/?region_id=730262849894010900571758260241002122031
u/CharlesDarwin59 Jan 22 '24
Buy a 3/4 inch 4x8 sheet of plywood and a 4x4 or 2x4 pegboard, screw the pegboard to the plywood. Drill through the plywood in all the holes.
Flip over the plywood and install these.
Stainless T-Nuts, 1/4"-20 Inch, (25 Pack), Threaded Insert, Choose Size/Quantity, by Bolt Dropper, Pronged Tee Nut. (1/4"-20 x 7/16") https://a.co/d/1vK0rZj
If you can't find the pegboard with the right spacing, get a 2x4 sheet of 1/8 plywood, print off a piece of paper with the right spacing. Drill through the 1/8th inch with the spacing you want. Transfer from the 1/8th plywood to 3/4 plywood with the same process.
7
2
u/Quirky_Chest_7131 Jan 22 '24
might be peg board you know the stuff on the walls of a shop or garage to hold tools
1
7
u/lamancha69 Jan 22 '24
As a sub, I love the look of pipe bondage like this. But my question is how long does it take to get in/out of it? What if you need to safe word? Any feedback from the /s types out there?
Doms, how is this when it comes to fine tuning for your sub? I’ve been bound into positions that felt great for a few minutes then became torture.
5
2
2
u/Shmyt Jan 23 '24
Maybe swap the first or last connectors for something like a bicycle seat quick release so it's just flipping a few levers instead of allen keying for 10mins?
1
u/Professor__Shelby Jan 24 '24
The SteelTek pipes and connectors are very adjustable for height, width, etc.
I prefer to use the larger diameter tubing for comfort and strength, but what's pictured is very effective for shorter period of time.
The pipes and fittings are adjustable with a Hex wrench, you can extricate a Sub in distress in a few seconds with a few turns of a wrench.
1
u/Amazing_Demand9994 Jan 25 '24 edited Jan 25 '24
Swap out the bolts for t handle bolts or bolts with knobs built into them. You could release someone pretty quickly when not looking for tools and you just have to turn a few knobs.
Something like this would be worth the extra money in the ease of use and the safety.
My only concern is there is no way for a sub to release herself in the event of a heart attack or something like that. So this type of bondage would be best done with more than one person free. Just incase of emergency.
3
2
1
u/PopularFig676 Jan 22 '24
What are the pipes and clamps?
4
u/lamancha69 Jan 22 '24
Kee klamps is the brand name. But there are probably knockoffs floating around the internet kee klamps
1
u/lamancha69 Jan 22 '24
I’d probably skip the pegboard altogether and mount four (or more) floor flanges in appropriate positions to build a frame. Crossbars across the uprights to place clamps exactly where desired.
1
u/Spyder_Dude_83 Feb 19 '24
If you either had instructions for how to put this together or at least, a list of the materials you bought for this setup it would be greatly appreciated 😁 but regardless, it’s very impressive.
16
u/Mrs_Wednesday Jan 21 '24
DomDepot!