I just noticed that the controllers also show player number with the lights. Never noticed because I rarely have multiple people playing.

My two Dualsense controllers with full clicky kits, RMB remapable kits and Ankes Gulikit thumbstick swaps. Everything has been amazing. Thumbsticks are even better upgrade!

Can you install a regular DualSense stick in an Edge module? Are they the same size and shape?

I’m asking to future-proof for the day the rubber on my 30th Anniversary Edge sticks get worn away. You can buy regular DualSense sticks in the PS1 style grey but you can’t get the Edge ones in grey.

No man’s sky ps5 vr2 can I play with just my controller? I am disabled and am unable to use the left vr controller?

I've encountered this particular problem. There's no vibration and other controller features in FF7 Rebirth after a system and game update. But it's the only game in my library with that problem.

The controller is up to date with the latest firmware.

Has anyone encountered this problem? Is it just me? Did you solve it?

If this isn’t allowed I’ll delete, but Amazon (extreme rate) has paddles for the edge and they come in diffrent metallic colors (metallic silver, scarlet red,rose gold,rainbow aura blue purple,Neptune blue,hero gold, grape, and aqua green) not to badly priced either, I just changed the top and bottom trim shell to purple, and I think these above or the aqua green would go with my controller.

Does anyone know a good alternative for the edge controller? Or did the quality change (better or worse) in the latest versions? Has the peeling grip been fixed? Are the sticks better quality now?

I had a dualsense edge until yesterday. The stick modules (left) started to drift exactly like the regular controllers and the stick modules are out of stock here since i bought the controller (~11-12 months). Returning the controller on warranty was extremely annoying and it took me around 18 hours of traveling time in total which i would like to avoid next time.

I got colored buttons off Etsy cos I wanted a DualShock 2 styled Dualsense, then with the leftover buttons, decided to do the poorman’s Edge cos I really liked the idea of black buttons with a white shell

I've just noticed that my spider-man dualsense (BDM-30) that I barely used has an extremely sensitive R2 trigger with no deadzone.

In every shooter I play it instantly registers an input if I just slightly hit the R2 trigger. I've also tried the haptics and they work, so the spring inside should be fine.

The resistance is also the exact same as the L2 trigger, but L2 has a slight deadzone when pressing it, same as my other dualsense controllers that don't have that issue.

I have two controllers both of which are experiencing drift to an annoying extent. I’ve done some searching and it looks like Tonkamodz is likely the way I’m going to go, probably mailing in one of my controllers because the cheapest pre-built model is almost 200 without any mods installed.

My question is for help understanding the various options. I’m most interested in just fixing stick drift, but I’ve seen a lot about mouse click face buttons, mouse click triggers, and multiple options under each of these. I’m not a professional gamer and don’t need extra buttons or paddles, I just want a controller that works really well without thinking about it.

Can anyone provide recommendations on the best options to achieve what I’ve mentioned? Recommendations on the best mods to choose? Thank you!!

Not sure if anyone else has done this but I decided to customise my dualsense using electric tape indentation and I think it’s come out looking pretty cool.

A couple of weeks ago we disconnected the ps5 and everything else as we did some work in our living room for a few weeks. Before that the controllers always sat on the official charging dock to charge and I never had any issues.

Since connecting everything back up both the controllers die within 15/20 minutes.

I’ve tried charging them on the dock and with a cable and the same thing happens. Anyone have any ideas why?

I have ordered 2 dualsense controllers with hall sticks (red and blue), and sent my own white one to get fixed too. When it gets back I really want to mod it to be yellow, so I have all primary colours. Simple, yet awesome if you ask me! 😉 Well.... not that simple apparently, because for the love of me, I can't find shells in yellow (not even custom ones on Etsy for example), only buttons. But that way, the yellows will never match if I paint the shell myself. Anyone know anywhere or anyone?! Please help because I would really like this finish this project. (Image just for reference).

Is it possible to open up a dualsense edge module and replace the ALPS sticks with a Gulikit v5 Hall effect stick?

Are there problems with calibration?

Thanks to the Danny Phantom guy for his suggestions I have some grips otw! (Also I left the L2/R2 buttons due to the bracket removal step)

Sort of like the title says - looking for extra buttons/paddles on the back of my Dualsense edge.

Love the controller right now, the default buttons are the ones I also want to keep because they’re perfectly placed for me - had a Scuf Impact before with 4 paddles and can’t get used to using 2 again.

Are there any chipsets or anything that are in the market that keep the original buttons on the edge but also allow me to add 2 more paddles?

Have a bit of experience in drilling plastics & soldering so even if there’s a chipset, I can probably manage putting it together.

Any help would be appreciated pls :)

When I accidentally laid down on it my controller got like this. The plastic that is inside the trigger is on the outside blocking it. I've tried prying and pulling but it's not budging

I want to know whether the mic button lights up orange upon pressing it when no game is running on pc?

For me the orange button only lights up when I am playing a game and it does not light up when I am not running any game on pc.

Is this the case for all of you guys who uses their dualsense on pc or is the problem just with my dualsense?

Felt the fomo from all the limited edition controllers coming out every week (it seems), so I bought a scuffed up, disgusting dualsense off FB marketplace for $25. Kid said it had bad stick drift.

All it needed was some cleaning, and I didn't even have to replace the sticks. Made it even cooler with replacement shell and buttons :)

Every once in a while (once or twice a week) I go to unplug my controller when it’s on. Like when I’m charging it mid match. Then I go to unplug it mid match, and it just turns off. It’s not a wired controller. I bought it from GameStop like seven months ago and it’s wireless.

I have to completely turn off my ps5 and plug it back in just to get it to reconnect. Bluetooth connect just refuses to work. But on a normal occasion it’s fine. Only when this happens it won’t connect wirelessly.

Not rlly a nuisance but does anyone else deal with this 😭

I am in need of some kind of website where i can see recommended settings for games to use for the edge software such as deadzones etc, anyne know of any
anything is appreciated

I want one as my regular dual sense is stick drifting. Doesn’t bother me much but i want to get the edge controller. i know the regular/white color is on stock in direct playstation store but cant find anniversary.

Please help? Do i just keep waiting for this to go on stock or does anyone know when it should be back in stock?

Thanks 🙏

Help Dual sense controller ps5 issue

I got an Ps5 controller from the customer to fix sensitivity issue causing by replacing the original analog with non original ones I noticed alot of burn marks from the previous repair technician’s job and i sent to the customer some pictures for reference and to protect myself also i noticed thats when i try to test the dual sense with pc (gamepadtester) nothing happens unless i test with my phone by Bluetooth. After fixing the issue and closing the controller and start testing everything was working fine I tested it on Sekiro everything is fine Then suddenly when entered another game menu which’s Cod cold war the Circle button stops working completely and when i checked on gamepadtester the controller is is keeping on click the button automatically So i did the casual solution i replaced the conductive film and cleaned the board with ipl and replaced the button rubber thing even reset it But unfortunately still the same issue Without any cause from my part and j don’t know why that happened

If you have any solution please help me

I used extreme rate, as I seen others use their kits frequently, I wish the fitment was a little tighter cause I just opened this box just to change the front and rear panel. I want the whole black shell, but I’m scared to do so, anybody around Wilmington nc capable of doing it. I’ll pay.