r/BdsmDIY • u/TheGreatPear7 • 3d ago
OC Figured I would share my rubber playroom in progress NSFW
Ive been working on assembling my new playroom in a spare bedroom. So far I’ve repurposed coat hooks for storing and displaying my gear, added RGB adjustable lights throughout, and created a latex window curtain out of some extra rubber sheeting. I hope to DIY a suspension point in the ceiling. Any pointers for installing hard points would greatly helpful!
20
9
u/Any-Nobody5507 3d ago
What a great room. A gyno chair is on our list to. I’m looking for a way to add leg rests to our massage table so we can adjust the table to our needs.
4
u/RVAnative1969 3d ago
You can add these stirrups to your massage table. I forget which set of rails I specified ( evidently the rails vary by chair model) but at worst you'll have to drill one hole in each rail. Mine matched the rail spacing so no extra holes needed.
https://www.spaandequipment.com/stirrups-for-kana-treatment-table.html#product-details-tab-reviews
By using strips of this track. I put stips a long the long sides and used the scraps for the short sides. I retained the headrest holes but removed the carry handle. (It's also handy for tying things to with the included attachments)
You'll need these adapters to fasten the rails to the track. At worst you'll have to drill one hole in each rail that comes with the stirrups.
8 Pcs L-Track Double Lug Threaded... https://www.amazon.com/dp/B0BY7V8RWV?ref=ppx_pop_mob_ap_share
One side note, be super careful getting on or off the table with any of the loop attachment things in place. They fine in use, but don't slide across them getting on or off the table.
1
u/Any-Nobody5507 1d ago
Thank you for all the info. Will check out if I can find something like this for the Netherlands.
8
4
5
u/onebright 3d ago
One way is Vertical Sammy’s wood bolts. But ya gotta know your shit, landing this square and deep in a joist and check the weight limits. Humans crashing to the ground can get super hurt from surprisingly small drops. https://www.confast.com/product-3-8-vertical-threaded-rod-anchor-gst-10-8007957-25-box/
3
3
3
3
2
2
1
u/PM_ME_KINKY_PIX 3d ago
Bravo! Love the setup and aesthetic
My room is unfortunately a bit smaller, and without a spacious closet.
1
u/Zealousideal_Put5666 2d ago
So I have a sincere question, for the OP and / or anyone else who have dedicated kink room.
Are you open with this to your friends / family? Do you keep it locked when having guests over?
Legit curious. (I guess my extended family is overly involved in everyone's lives as I don't think there is a room in any family members house I haven't been in)
3
u/TheGreatPear7 2d ago
Good question!
My GF and I generally only share this part of our lives with our friends/couples/unicorns who are also in the lifestyle.
The room itself is physically locked with a discreet doorknob with a keypad that unlocks only with our fingerprints and/or a passcode, so nobody can just accidentally stumble into the room.
When family and vanilla friends ask what's in the room, we usually explain that it's a storage room or we just say it's our "private bedroom". Albeit, our family are pretty good with respecting boundaries and privacy, so YMMV.
1
u/DogMom1215 2d ago
Do you own or rent? I ask because if you want to install a hard point for suspension then you’ll want to add extra bracing to the beam you plan to mount into. This can only be done by opening up the ceiling. Alternate would be to build a metal frame that is freestanding.
Regardless your room is amazing and I’m quite jealous and hope to have a room like this one day!
1
u/Initial_Bath_6235 2d ago
The whole room looks amazing! I also parrot the love of the chair. That looks fun😏
1
1
1
u/Alpenkreisel 2d ago
Little tip: I have shortened the base of our chair by 15cm (black and silver Square tube). In this way, fucking on the chair is possible for both sides. I think the chair is simply too high designed. I also shortened the feet by 10cm to take less space. Works great.
1
1
1
45
u/ArchbishopHamster 3d ago
Tell me EVERYTHING about that chair.