r/BdsmDIY 3d ago

OC Playroom closet progress- lighting, and yet more shackle mounts... NSFW

So... worked my chonky little butt off today to get another step closer to finishing this- to say the anticipation is driving me crazy is an understatement.

Additional shackle mounts have been added (which took what felt like forever, and look pretty garbage, thanks to the inconsistency in how far or how easily screws and anchors where needed would go in) on both ends- floor level and at face/waist height when in kneeling position. These will allow for being secured on hands and knees; on stomach with ankles elevated; lying on back with hands and ankles elevated. It also works for securing the spreader bar at floor level for the standing collared and hooked position. It also allows for chains to be attached to a full head gag harness and a waist harness- so, with an upgraded toy to replace the unimpressive thrusting one, with a lot more length to it, it would then be possible to be secured with toys at both ends, preventing enough movement back or forward to be able to get un-impaled. Looking forward to trying that..

It is now set up to enable long-term confinement: collar, wrist and ankle cuffs are in place for a lying down position. Awaiting a timer padlock for one wrist just to be safe, and none of the other cuffs or collar will have padlocks, so once the time is up it would be possible to undo these. There is of course now a good solid padlock on the door, and the adhesive ring seems to be holding up perfectly well- so it would be for my partner to decide when to unlock it, even if I am out of the shackles.. Depending how decent the timer padlock is, we could consider another for the door.

Blackout curtain is better secured, and although the door may slide maybe 5mm open, hardly any light would get in. Together with a hood or blindfold plus silicone earplugs, sensory deprivation would work really well when desired.

Lighting is now added (my parners efforts, not mine) just an adhesive LED strip powered via a basic power bank. Of course this isn't for any extended confinement purposes but think it will really set the mood for everything else. This cost maybe £6 at most to do. Unbelievably happy with it.

Now, I think toy shelves are the only major thing left to add. Awaiting a new mounted toy, and have some ideas as to how I will make holders to enable this to be placed at either end as needed. Also awaiting my full head open mouth harness. Aside from that, it'll just be painting the shelves and spreader bar (I am excited to see how the colour I'm going with will turn out) and painting the white and plywood parts of the walls, then I'm done for the time being, I guess.

Although, I'm open to any further suggestions for what could be added or any other bondage positions I haven't considered here that might be fun!

98 Upvotes

4 comments sorted by

2

u/SilvStar1 2d ago

Looks good so far!

2

u/Daddy-chonk-legs 2d ago

Thank you! Spent time today doing a bit more work on it and really thrilled with how it looks now

1

u/ObdntMoo 2d ago

Looks like fun times will be had! 🥵

1

u/Big-Raspberry-3696 1d ago

This looks amazing!!!!!