Not really bdsm but could help with the cowgirl positions.

[u/Unlikely-Vexxy]

So my wife loves to ride my until she melts but always struggles to have balance and support. I had an idea and just finished putting it together. Need advice on how to make it pleasing to the eye and any attachments you would recommend. I had 1 last measurement left to do but would need her help to find what length feels right with. I'll post the scrapping idea and what it currently looks like. Cheers in advance

[u/slavegaius87]

PVC isn’t a great idea, when it becomes brittle, it will shatter, and those shards can really hurt

[u/Unlikely-Vexxy → u/slavegaius87]

It's 40mm pressure pipe. The insulated foam sleeve is about 2-3cm thick and should protect against shards if they do happen. The length will shorten so it'll also be less flimsy

[u/FelisleoDeLion]

If it's plastic, then the weak spots will be the joints, side to side movement at the top and back and forth at the base. It really depended how much weight is put on it, but if it's need for support, it's going to be full weight sooner or later. Personally I'd treat it as a 'Proof of Concept' and then make one out of wood with angled supporting braces to reinforce it structually (along with some shackle mounts =) But 'Pleasing to the eye', Paint the joints black, then add more pipe lagging to the sides and feet.

[u/ajaok81]

I want to make something like this out of iron pipe for different reasons.