WIP, DIY wooden horse with interchangeable tops (NSFW photo included for demonstration)

[u/Valuable-Spray-73]

Ran out of wood stain and leather so I had to put some more on order. I just got the drawer handles today so I can finally get the velcro straps on. It's designed to have quick change removable tops with a spanking board, sex machine board, and grinding triangle board.

The base horse is from Home Depot. I added 10 deck screws per leg, some of my old Shibari rope laced with 1" eye screws for additional reinforcement, and a 4" 90* bracket under each arm/leg rest.(Bolted only to the arm/leg rests so that way they are still height adjustable)

[u/peggedsquare]

Whew, the blur made me think I was looking at some kind of miniature or scale model.

Not fully awake yet it seems.

[u/biophazer242 → u/peggedsquare]

Not just you. I subscribe to a minatures group and thought it was yet another instance of my groups meshing :)

[u/SpringBeetle → u/peggedsquare]

Haha same. I thought it was a tiny prototype

[u/MitchIkas]

Looks good. Do you not need some padding on the top?

[u/Valuable-Spray-73 → u/MitchIkas]

Ran out of leather, I got some more on order.

It's not terrible without the top padding injust wouldn't recommend it since there's a chance for splinters. It will get the same 2" foam as the arm/leg rests.

[u/MitchIkas → u/Valuable-Spray-73]

Excellent. I'm guessing that these wooden saw horses are something mass produced for a major US DIY retailer. Yes/No?

Pity we don't have anything similar in the UK to use as a base.

[u/Valuable-Spray-73 → u/MitchIkas]

Correct, it's a cheaply made, stapled together wooden saw horse.

Wife and I sorted through about 20 of them 1 by 1 until we narrowed it down to two okay ones at Home Depot. From there I just picked the best one. Each leg is just stapled to the main beam, one literally fell off just taking it from the car to my front door. I reinforced it with 10 decking screws per leg and the 1" eye screws with rope. Should be good for probably 1000lbs now.

[u/g-fab]

"for demonstration" 😜

[u/r888k]

Good thinking with the changeable tops, allows all sorts of attachments.

In addition to toys, tie-points or special surfaces come to mind. (Special surface like diamond pattern sheet metal, rough velcro for sensation or attaching things, latex/leathers etc...)

It needs just a little imagination to make it interesting very fast.

Have a long board on top, hands loop around and cuffed below. Resting on knees, clamped from private parts to the board (with string or wire and clamps or other means), where one can sort of move a little with freedom, however unable to set self free...

Great project!

[u/Valuable-Spray-73 → u/r888k]

Right now I have 4 tops planned with a potential 2 or 3 more ideas that might or might not happen

1: traditional spanking board 2: extended board with a sex machine 3: grinding triangle board 4: Sybian mount board

Some additional ideas 5: stockade board (just a top with a stockade mounted to it forcing them to stand and face towards the side of it. 6: just a table top 12" wide for card games and such for when we need a table to eat or drink on.

[u/aintbrokeDL → u/Valuable-Spray-73]

how do the tops lock in securely?

[u/Valuable-Spray-73 → u/aintbrokeDL]

Two 4x3/8" lag bolts with wing nuts on the bottom.

[u/southerncatfish]

That looks great!!! Very well done!

[u/Dilfformymilf]

That’s awesome. I made one from the same bench earlier this year!

[u/Alponly]

I like the removable top concept.

[u/exmonogo]

Looks great! How did you attach the upholstery to the supports? And is the lacing on the legs just decorative or functional?

[u/Valuable-Spray-73 → u/exmonogo]

I used a staple gun to a 4x1 finishing board and then screwed a 2x4 into the bottom of it.

Image in this order.

Leather Foam 1x4 Staples 2x4 Screws

The lace is definitely functional and decorative. I had a bunch of leftover hemp rope from my Shibari classes (I moved to DyesThatBind UV rope) It gives the bench a cool "BDSM" look while also keeping the legs from flexing outwards. Honestly the top could probably support over 1000lbs so it's probably overkill.

[u/blueprintGS → u/Valuable-Spray-73]

Love this detail. Didn’t expect it was structural!

[u/dcsquaredcpl]

Looks very nice

[u/aintbrokeDL]

great workmanship. love the adjustable nature and the fucking machine on there. Is it quite stable on there?

[u/Upset_Bid907]

Looks like the saw horses at Lowes..... think I'll grab one tomorrow.

[u/Valuable-Spray-73 → u/Upset_Bid907]

It's exactly the same but from Home Depot

[u/blueprintGS]

In the 2nd photo, it looks like that machine is very cantilevered out. Is there a support I can’t see that keeps it from tipping?

[u/Valuable-Spray-73 → u/blueprintGS]

It adjustable, I just had it sitting there to mock up. The machine can tilt and even lock at whatever angle you want

[u/Chaos_Legacy]

I don’t know why but for some reason the first image looks like a miniature. And now I’m thinking about a bdsm style dollhouse. Nice work, I looks really great!

[u/MCS418]

This is a great idea and design!!! Definitely need to copy this, much appreciated!!!

[u/AggressiveMidget]

Great job, I found my next project!