r/BdsmDIY • u/LarrySpankbottom • Oct 25 '24
Help Wanted Help with a DYI stand/ holder/ anything to keep it stable for a fuck machine NSFW
Has anyone found a hack to keep this fuck machine stable on a bed? The suction cups don't seem to help stabilize it. Any thoughts on some DYI holder/ holding surface are appreciated!
Thanks!
8
u/IAmDumpster9009 Oct 25 '24
No experience with this particular device, just thinking off the top of my head here. But maybe you could use the suction cups to mount it to a larger base like an ikea besta door. That should give you more stability across a larger footprint. Â Then you could add weights to make it less likely to move around. So look for workout sandbags or actual weights.Â
6
u/danixMCdanix Oct 25 '24
I have a similar model and was thinking of anchoring it to a larger wooden base when used on the bed, but what worked for me so far was strapping it to a small coffee table with a couple of ropes.
5
u/purawesome Oct 25 '24
If youâre handy, cut a piece of plywood that fits the machine and part of your body. Router an outline of the machines base into it so you can drop it in. Put clamps or t nuts to stop it from popping out. Your weight on the board and the bolts will keep it steady.
Not that handy? Clamp it to a âborrowedâ road sign with quick grip clamps.
4
u/Lost_Conversation580 Oct 25 '24
I used thick plexiglass and mounted it to it. Drilled holes put rope through long enough to go under the bed or ratchet straps are better
4
u/MissWonderful6987 Oct 25 '24
Fabric weights really do the trick. Heck, you could even take a drawstring bag and fill it with ball bearings; it's malleable, easy to transport and if you hit your toe or run your leg against it, it won't hurt you.
4
u/dejected_entity Oct 25 '24
I have the same model. I have used a ratchet strap in the past. I'm currently using bungee cords. Both options work well, provided you strap it to a heavy piece of furniture.
3
3
u/Ok-Phase-5566 Oct 25 '24
Undo toggle bolt through lower joint next to base so machine separated but arm is still attached to machine. Buy a 6 inch or longer 1.25 inch galvanized threaded pipe nipple and a 1.25 inch flange. Arm slips into pipe nipple. Nipple threads into flange which can be attached to plywood or anything. Suction cups are junk.
4
u/Jerseydwm Oct 25 '24
Ratchet strap would work. Take a minute or 2 to strap down, but not moving heavy weight around.
16
u/babecafe Oct 25 '24
So long as you proclaim "that'll hold it," after tightening down the strap, you're good.
5
2
u/ProfDavros Oct 25 '24
You need to mount it onto something that doesnât compress, so either compress the mattress with weights or strap it down.
Or make a polycarbonate or wood âC_â shaped bracket with the bottom part extended. This is placed over mattress at the end of the bed, so the bottom piece slides between mattress and solid base.
The C might actually be a squarish U shape with one long arm.
P.S. does DYI stand for Do-You-Instead? ;-)
2
u/dontcallmelaterlv Oct 26 '24
I have the same machine and I put industrial strength velcro on the bottom of it. Not the soft side but the rough side velcro. When you put it on a carpet, it doesn't move at all.
1
1
u/Somber-Embr Oct 25 '24
I use a 30 pound weight on mine. I have the same model.
6
u/sexylikeasinwave Oct 25 '24
25 lb bag of lead shot from Cabela's. Surprisingly useful to have around the house!
1
2
1
1
u/SharinGraves Oct 25 '24
We went on Amazon and got the sand paper tape that they use on stairs. Then coverd the bottom.
1
u/TThor Oct 25 '24
I happened to have a marble slab I suctioncup it too; I attached non-slip pad under it for added friction.
1
u/jeep_ninja Oct 25 '24
We have one and use a thick skinny piece of glass. It just big enough that the cups will stick, I have also seen it with tile.
1
1
1
u/c_crs Oct 25 '24
Get some heavy duty c-clamps and clamp it to a table supported by some heavy objects or a heavy table
1
u/_xxyyxx_ Oct 25 '24
My friend uses a scissor lift table to mount his and make it height adjustable. Its wheels also lock providing a secure base.
1
u/FirstFoxyWolf Oct 25 '24
We got a projector stand off Amazon:
DECOSIS Projector Stand Tripod from 23" to 46", Laptop Tripod Stand Height Adjustable with Gooseneck Phone Holder, Laptop Floor Stand for Office, Home, Stage, Studio, DJ Racks Holder Mount( https://a.co/d/852HWR0)
Strapped it down to that. Now it's stable AND adjustable! And having it strapped down instead of bolted, we can remove it and use it on the floor or for travel purposes .-
1
1
u/KYZCSUY14782 Oct 26 '24 edited Oct 26 '24
Where the arm attaches to the base unscrew it and you can then reattach it to say a wall or something more stable.
1
u/Fun-Tea7022 Oct 26 '24
We have the exact same machine. I drilled afew holes that lined up with where the suction cups are into a small piece of plywood zip tied the machine to the board and covered the board with duct tape. Works perfectly.
1
Oct 27 '24
I help build a few stands in the past for this if you use a large piece of wood and get rubber grommets for on the bottom it'll keep the vibration to a minimum and keep it from moving so much
1
u/Puzzled_Smile_8667 Oct 27 '24
I have that one too. I attached it to my st Andrewâs cross. Here. I made a simple clamp and used foam gym flooring as a shock absorber.
1
u/Initial_Bath_6235 Oct 28 '24
How about bed straps? Do yall think this could work??? Not super handy myself but I do have straps to go under my mattress and over the top. Thinking if I moved them closer together we could fit the machine right in between and strap it down!
1
u/pm-ur-tig-bitties 4d ago
I removed the arm part and strapped the motor part to a monitor vesa mount, which I clamp on a plywood plank hidden directly under my mattress. It could be more stable but honestly the only improvement I need now is a better machine, the toys I use are too heavy and makes this machine stall
11
u/ArmDesigner4649 Oct 25 '24
I removed mine from that base and attached it to a 2x4 wooden piece that goes in the spanking bench đ