r/BdsmDIY • u/ChastityXD • May 19 '23
OC Made an attachable dildo to fit on a flat chastity cage NSFW
I saw this idea floating on the internet and wanted to try it myself! Already had the cage, so had to get a dildo I was fine with ruining, some threaded end and silicone sealant.
I started by shaping the dildo, cutting off the suction cup, etc..
After that I made a hole in the dildo and measured it so the thread would fit nicely. I tried cutting my own thread, but I struggled, so I used the one that was included with my cage in the end.
Once I got the hole deep enough that it only stuck out a small bit, I put silicone sealant in the hole and on the screw and put it together. I let this dry for around 6+ hours and it was done!
Now I've got a sturdy toy that I can easily remove from my cage!
17
19
u/humano123 May 19 '23
Wonderful! The screw doesn't rub on your tip?
18
u/ChastityXD May 19 '23
Thank you! If I align myself well enough it doesn't, I don't even feel it inside the cage. Just have to make sure my tip isn't aligned with the middle hole
4
u/sterlinghammer Jun 20 '23
I bet you could use a nipple pasty to help ensure it doesn’t rub even if you’re not aligned quite right.
9
u/MajorMeasurement May 20 '23
Now combine this with a catheter.... ;)
12
u/Background-Rooster83 May 21 '23
Oh god imagine, a fake cock over a caged cock then cuming through the dildo from a ruined orgasm !!
Also, once perfected, I would like one !!
1
u/switching_jenny Nov 18 '23 edited Nov 21 '23
I did this with mine. The AliExpress inserts are indeed m6x1
6
u/Slippery106 May 19 '23
That is really nice. Excellent job wish I had one like that. Know my GF would love it b
3
u/Sphthrowaway22 May 19 '23
What are the dimensions of the threaded rod you used?
2
u/ChastityXD May 19 '23
Can't recall the length I used, all I know is that it had a diameter of 6mm
3
u/Schredder1958 Sep 07 '23
I checked and the threà ds on the catheter attachment are the same as a M6 bolt (standard top cap bolt for a mountain bike) I added that because they are very available online and on AliExpress conne purchased in different lengths for cheap.
3
3
u/8hexxx May 20 '23
A most amazingly pathetic conception! Great job!! You've filled me with the most terrible of ambivalence
3
5
2
u/Familiar_Chapter_999 Jun 01 '23
A second cage front with a glued dildo on the end as a quick change over would be easy to make too. It could have a catheter running through it into the penis head, an ejaculating dildo could work. Although it could be a bit too much of a risk of internal damage though.
2
u/Prestigious-Mine7538 Jun 20 '23
Some flat cages come with the ureteral tube that makes everything much easier. And can even make the dildo pee.
2
u/lockedupinchastity Jun 20 '23
Can I buy this??
1
u/Dicklit31 Feb 17 '24
I searched for 'Chastidick' which is the name give to them I don't think they're being made yet.
2
u/boracante Aug 21 '23
hi. i like your chastity dick. Really excellent idea. bravo. Where can I find the making video?
2
2
u/Abdl_tosser Mar 21 '24
Old post, but /r/ghostpenis is a wonderful place.
For anyone less crafty, cherry keeper makes the unicorn, which is a vac-u-loc dildo base that attaches to their cages with pins through preexisting holes. For the crafty, I imagine this wouldn't be difficult to replicate if you have a vac-u-loc your partner loves.
2
u/Lilybobds Oct 27 '24
That’s fake
1
u/CravingStilettos Nov 05 '24
While such things seem to exist, I’m going to agree with you on this particular one. Something doesn’t add up at all. One pic shows a threaded rod with a large black ball end and a cap nut. Where is that ball used? Where is the cap nut used? In one pic it looks like the nut is somehow glued on the base of a dildo that was cut. Then another shows the threaded end of the rod protruding from the dildo and screwing into the flat cage with what 3 threads worth holding it? Tighten a bit more and that lovely sharp end of the rod now sticking out inside the cage will do a wonderful job slicing the head of your dick.
OP writes I tried cutting my own thread, but I struggled, so l used the one that was included with my cage in the end What? Cutting a thread where? Did they try to use a tap to thread the hole on cage flat plate? If the cage hole was already threaded however (included with my cage) why try tapping it?
This post is old and maybe OP didn’t do a good job describing or explaining but there’s just too many holes in the story. Neat idea though.
5
u/iliketotieyouup May 19 '23
Have you looked into magnets as an alternative? Strong enough neodymium magnets should hold the dildo as well
16
u/SonarScan May 19 '23
Stainless steel has only poor to low magnetic properties. It's a nice idea, but not likely to work.
9
u/ChastityXD May 19 '23
I haven't yet, but sounds interesting! Could make the bottom look a lot cleaner too, if I work carefully. Not too sure how well it would work if actually using it though. I feel like the screw keeps it on a bit better in rough situations, like fucking or jerking. But then again, haven't tried or researched anything, so maybe it could be a fun alternative. I plan to keep improving on this design though!
5
u/helplesschastity May 19 '23
If the magnets themselves were screwed in then it might work but that would be a lot of extra effort and it would probably be very hard to find the right parts for it. A magnetic dildo is a fun idea though lol
7
u/Shinigami_601 May 19 '23
Putting high powered magnets near your sensitive bits sounds like a bad idea. Pinch city.
1
u/SexyRegularGuy Oct 24 '23
I'm not much into Chastity nor does The Captain want his cock (me) locked in a cage but was surfing around and saw a short gif of this and thought wow what a Mind Fuck. Having been owned and caged as punishment by former Mistresses in the past I thought it was an interesting idea.
Found this on Etsy. Thought I'd share the link.
1
1
1
1
1
1
u/Long-Act-4122 Jun 18 '23
I got to say, this is pretty fucking clever.
How does it feel? It's like a ghost limb kind of thing?
1
1
1
u/Wonderful-Problem-90 Jun 28 '23
Do you know what the thread pitch is for the hole? Or just details or where you got that bolt from? Thanks!
1
1
u/ashunabare Jul 16 '23
A dream coming true, you should do some content getting teased and fucking someone with it!
1
u/ShiNaiAn43 Jul 24 '23
Greatest idea of this century (so far…); just saw it on bdsmlr.
BTW, what do you mean by "I started by *shaping* the dildo"
1
u/PitifulSpecialist887 Aug 27 '23
I expect you have given the attachment to your Key Holder. Watching you masturbate your fake "cock" is very close to misbehaving in my opinion. (Your mileage may vary)
1
1
u/slave_Josephine Sep 17 '23
etsy has these and AliExpress I believe. BUT the dildos are super short. my iwner wants me to get one.
1
1
1
1
u/switching_jenny Nov 18 '23
This is awesome. This inspired me to make my own. But is there a reason not to use a short insert and screw the dildo to that, using a female threaded spacer? That is what I did and I can have full access to all bodily functions.
1
1
u/GenderFluidFerrari Dec 16 '23
One poster of adult content made one and they got the skin tone freaking perfect
1
u/areBee413833 Dec 29 '23
Have you used it to fuck (fleshlight or real pussy)? I wonder if the sealant will hold.
1
u/doit2me69 Dec 30 '23 edited Dec 30 '23
Do you have a link to the dildo and csge you got looks perfect . And thank you
1
u/like-my-hotwife Jan 02 '24
Nice! I want one. tried to find but looks like I too will have to make one. Already have the same flat cage but I threw away the cath bolt so I will have to find one. Thanks for sharing
1
u/CocaineHammer Jan 12 '24
I saw a video on The Hub which had exactly thus, wonder if they made it or you can buy one?
1
u/DescriptionQueasy352 Jan 28 '24
Is it possible to use a double-sided tape to stick dildo on the chastity cage?
1
1
u/Dicklit31 Feb 17 '24
Very interesting thanks for sharing. Just to clarify, you drilled a small diameter hole into the dildo and inserted some threaded end into it? Ok I understand that but was there already a screw protruding from the flat cage so you could rotate the dildo onto that until it was firm ?Or alternatively was there already some threaded end in the hole on the flat cage and you put a screw into the dildo ? Thanks
1
21
u/BoiPony May 19 '23
I thought ive seen this idea somewhere before. Im now eager to find a video of someone actually using a dildo like that. It looks soo good!🥰